60-615-10-319.5 Quik Bridge Learn Mode Repeater

1 Learn Mode Repeater

Description
Receives and retransmits signals from Learn Mode sensors, touchpads, and other Repeaters to increase the distance a sensor can be mounted from the control panel.
Ideal for large installations where: 1) distant sensors perform poorly on the sensor test; 2) distant sensors cause supervisory problems; or 3) control panel antennas are shielded by metal.

• Can be programmed to repeat specific sensors, touchpads and repeaters
• Dual-antenna receiver for improved sensor data reception
• AC power failure option
• Supervisory reports every 64 minutes
• Tamper switch
• 600' typical open-air range
• Main power supplied by: 15-16.5 VAC, 2 VA transformer (required if backup battery is used), or 9-16.5 VAC, 2 VA transformer, or 12 VDC power supply
• 24-hour backup with 12 VDC, 1.3 Ah lead-acid battery
• Crystal-controlled superheterodyne radio receiver
• 40°-120°F operating temperature

Color: White
Dimensions: 4.125" wide, 5.25" high (+8.75" with antennas), 1" deep
Compatibility: all Learn Mode systems