Product 2/3

Previous
Return to the Product List
Next

1650 Uplink Digicell Universal Alarm Transciever

$499.00

  • Model: UP-1650
  • Manufactured by: Numerex/UpLink


Product Description

The Uplink DigiCell 1650 transmits full alarm panel data via the fully redundant Cellemetry wireless data network. Housed in a steel enclosure, with its own power supply and phone monitor, the unit comes ready for installation. The new e-mail feature allows daily or weekly tests to be sent directly to you, giving you the peace of mind that your system is doing its job.
Add to Cart:

Features

  • Daily or weekly test transmissions, can optionally report to Central Station
  • Supports Ademco Contact ID, Radionics Modem IIe/IIIa2 format
  • All alarm events are two-way, sending an acknowledgement to the 1650
  • Central Station format, phone numbers, account numbers, and alternate notifi cation paths are set over an interactive website
  • Unit is fully web enabled including demand tests
  • All messages, signals and communications are viewable at the website
  • Telephone line monitor checks both current and voltage
  • Transmit frequency. 833.43 - 834.66 MHz
  • Receive frequency. 878.43 - 879.66 MHz
  • Transmission rate 10k baud, using Manchester encoding with CRC

    • Specifications


    Status LEDs

  • Seven (7) status LEDs
  • Two modes - Signal Strength Mode and Normal Operating Mode
  • Signal Strength Mode
  • Built in battery charge circuit

    Dimensions
  • 11.25”L x 11.25”W x 3.5” D

    Cellemetry Transceiver Specification
  • FCC certified Cellemetry Data Service radio
  • Full three (3) watt transmitter
  • Receiver Sensitivity to -115dBm
  • Channel spacing 30kHz.
  • Transmit frequency. 833.43 - 834.66 MHz
  • Receive frequency. 878.43 - 879.66 MHz
  • Transmission rate 10k baud, using Manchester encoding with CRC

    Antenna
  • Standard is unity gain, omni directional 2.5dBm whip with SMA connector
  • Optional Antennas: 2.5 dBm low profile, 5dBm Universal Mount, and 9dBm Yagi

    Power Supply
  • 16.5 V AC Input
  • 2A Peak Current
  • Built in battery charge circuit

    Accessories not Included
  • 12 V Battery (4 or 7 AH)
  • Transformer
  • Double-Ended RJ-31X Cable

    • Contents

    1 DigiCell Communications Board
    1 Alarm Panel Interface Board
    1 Telephone Line Monitor
    1 Power Supply with Battery Trickle Charger
    1 Box Enclosure

    Reviews

    There are currently no product reviews.
    NOTE: Reviews may require prior approval before they will be displayed

    Write Review


    Product 2/3

    Previous
    Return to the Product List
    Next

    This product was added to our catalog on Tuesday 30 November, 1999.
    Your IP Address is: 38.103.63.62
    Copyright © 2009 SafeWatch Security Services