1500 Uplink Digicell Universal Alarm Transceiver

The Uplink DigiCell 1500 typically transmits alarms in less than one second, versus the four to five seconds it takes for a phone line to dial the central station, dramatically reducing the time a professional thief has to disable an alarm panel. This feature becomes even more significant in a fire emergency, when every second counts. Uplink's alarm acknowledgement feature guards against alarms ever being "lost", as can happen with systems dependent on radio, since Uplink continues to send an alarm until it is acknowledged by the network.

Website Features

Inputs

• Three (3) Inputs
  • Two (2) Inputs Provide:
    • Contact Closure - Normally Open or Normally Closed
    • Voltage - Normally High or Normally Low
    • Open Collector - Normally Off or Normally On
  • One (1) Input Provides (Through Switch Selection):
    • Contact Closure - Normally Open or Normally Closed
    • Voltage - Normally High or Normally Low
    • Open Collector - Normally Off or Normally On
    • Pulse Counter Input
      • Report every 12 or 24 hours
      • Read or reset count on demand
    • Bell Trip
    • Siren Trip

Outputs

• One (1) Output (Through Switch Selection)
• Wet contact relay
• Form C dry contact
• Trouble output or controllable

Physical / Electrical

• 12 VDC
• 80 mA standby, 1500 mA peak (150 ms transmission burst)
• 5.75” L (without Antenna) x 2.3” W x 1.25” H
• White Plastic with Mounting Clip

Cellemetry Transceiver Specification

• FCC certified Cellemetry Data Service radio
• Full three (3) watt transmitter
• Receiver sensitivity to -115dBm

Antenna

• 824-896 MHz, 1/4 wave
• Gain, profile and mounting options
• Optional: 2.5 dBm low profile, 5dBm Universal Mount and 9dBm Yagi